digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 5kp5.0-5kp110a 5000w transient voltage suppressor features ? available non-rohs (standard) or rohs compliant (add pbf suffix) ? available in both unidirectional and bidirectional construction (bidirectional ?c? or ?ca? suffix) ? available in both axial leaded and radial packages (?r? prefix for radial packages) ? axial and radial available as ?hr? (high reliability) screened per mil-prf-19500, jantx level. add ?hr? suffix to base part number ? selections for 5.0 to 110 volts standoff voltage ? suppresses transients up to 5000 watts @ 10/10000a and 34000 watts @ 8/20s ? fast response maximum ratings peak pulse power dissipation @ 25c 5000 watts at 10/1000s impulse repetition rate (duty factor) 0.05% t clamping (0 volts to v (br) min): < 100ps theoretical for unidirectional and < 5 ns for bidirectional operating and storage temperature: -65 to +150c thermal resistance: 20c/w junction to lead or 80c/w junction to ambient when mounted on fr4 pc board with 4mm 2 copper pads and track width 1 mm, length 25 mm steady-state power dissipation: 6 watts at t l = 30c or 1.56 watts at t a = 25c when mounted on fr4 pc board described for thermal resistance forward surge voltage: 3.5 v maximum @ 100 amps 8.3 ms half-sine wave solder temperatures: 260c for 10 s (maximum) electrical characteristics breakdown voltage v (br) reverse stand-off voltage v wm (1) v (br) @ l (br) maximum clamping voltage v c @ l pp maximum standby current l d @ v wm maximum peak pulse current l pp fig. 2 maximum temperature coefficient of v (br) v(br) part number (2) volts volts ma volts a a mv/c 5kp5.0 5.0 6.40 7.30 50 9.6 2000 (3) 520 4.0 5kp5.0a 5.0 6.40 7.00 50 9.2 2000 (3) 543 4.0 5kp6.0 6.0 6.67 8.15 50 11.4 5000 439 4.0 5kp6.0a 6.0 6.67 7.37 50 10.3 5000 485 4.0 5kp6.5 6.5 7.22 8.82 50 12.3 2000 407 4.0 5kp6.5a 6.5 7.22 7.98 50 11.2 2000 447 4.0 5kp7.0 7.0 7.78 9.51 50 13.3 1000 378 5.0 5kp7.0a 7.0 7.78 8.60 50 12.0 1000 417 5.0 5kp7.5 7.5 8.33 10.2 5 14.3 250 350 6.0 5kp7.5a 7.5 8.33 9.21 5 12.9 250 388 6.0 5kp8.0 8.0 8.89 10.9 5 15.0 150 333 6.0 5kp8.0a 8.0 8.89 9.83 5 13.6 150 367 6.0 5kp8.5 8.5 9.44 11.5 5 15.9 50 314 7.0 5kp8.5a 8.5 9.44 10.4 5 14.4 50 347 7.0 5kp9.0 9.0 10.0 12.2 5 16.9 20 295 8.0 5kp9.0a 9.0 10.0 11.1 5 15.4 20 325 8.0 5kp10 10 11.1 13.6 5 18.8 15 266 9.0 5kp10a 10 11.1 12.3 5 17.0 15 294 9.0 5kp11 11 12.2 14.9 5 20.1 10 249 10 5kp11a 11 12.2 13.5 5 18.2 10 274 10 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20120710
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 5kp5.0-5kp110a 5000w transient voltage suppressor electrical characteristics breakdown voltage v (br) reverse stand-off voltage v wm (note 1) v (br) @ l (br) maximum clamping voltage v c @ l pp maximum standby current l d @ v wm maximum peak pulse current l pp fig. 2 maximum temperature coefficient of v (br) v(br) part number (2) volts volts ma volts a a mv/c 5kp12 12 13.3 16.3 5 22.0 10 227 11 5kp12a 12 13.3 14.7 5 19.9 10 251 11 5kp13 13 14.4 17.6 5 23.8 10 210 12 5kp13a 13 14.4 15.9 5 21.5 10 232 12 5kp14 14 15.6 19.1 5 25.8 10 194 13 5kp14a 14 15.6 17.2 5 23.2 10 215 13 5kp15 15 16.7 20.4 5 26.9 10 188 15 5kp15a 15 16.7 18.5 5 24.4 10 206 15 5kp16 16 17.8 21.8 5 28.8 10 176 18 5kp16a 16 17.8 19.7 5 26.0 10 192 16 5kp17 17 18.9 23.1 5 30.5 10 164 19 5kp17a 17 18.9 20.9 5 27.6 10 181 18 5kp18 18 20.0 24.4 5 32.2 10 155 20 5kp18a 18 20.0 22.1 5 29.2 10 172 19 5kp20 20 22.2 27.1 5 35.8 10 139 24 5kp20a 20 22.2 24.5 5 32.4 10 154 22 5kp22 22 24.4 29.8 5 39.4 10 127 27 5kp22a 22 24.4 26.9 5 35.5 10 141 24 5kp24 24 26.7 32.6 5 43.0 10 116 30 5kp24a 24 26.7 29.5 5 38.9 10 128 27 5kp26 26 28.9 35.3 5 46.6 10 107 33 5kp26a 26 28.9 31.9 5 42.1 10 119 29 5kp28 28 31.1 38.0 5 50.1 10 99 34 5kp28a 28 31.1 34.4 5 45.5 10 110 30 5kp30 30 33.3 40.7 5 53.5 10 93 38 5kp30a 30 33.3 36.8 5 48.4 10 103 35 5kp33 33 36.7 44.9 5 59.0 10 85 41 5kp33a 33 36.7 40.6 5 53.3 10 94 38 5kp36 36 40.0 48.9 5 64.3 10 78 45 5kp36a 36 40.0 44.2 5 58.1 10 86 40 5kp40 40 44.4 54.3 5 71.4 10 70 50 5kp40a 40 44.4 49.1 5 64.5 10 78 45 5kp43 43 47.8 58.4 5 76.7 10 65 54 5kp43a 43 47.8 52.8 5 69.4 10 72 49 5kp45 45 50.0 61.1 5 80.3 10 62 57 5kp45a 45 50.0 55.3 5 72.7 10 69 51 5kp48 48 53.3 65.1 5 85.5 10 58 62 5kp48a 48 53.3 58.9 5 77.4 10 65 55 5kp51 51 56.7 69.3 5 91.1 10 55 65 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20120710
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 5kp5.0-5kp110a 5000w transient voltage suppressor electrical characteristics breakdown voltage v (br) reverse stand-off voltage v wm (note 1) v (br) @ l (br) maximum clamping voltage v c @ l pp maximum standby current l d @ v wm maximum peak pulse current l pp fig. 2 maximum temperature coefficient of v (br) v(br) part number (2) volts volts ma volts a a mv/c 5kp51a 51 56.7 62.7 5 82.4 10 61 60 5kp54 54 60.0 73.3 5 96.3 10 52 70 5kp54a 54 60.0 66.3 5 87.1 10 57 64 5kp58 58 64.4 78.7 5 103.0 10 49 77 5kp58a 58 64.4 71.2 5 93.6 10 53 69 5kp60 60 66.7 81.5 5 107.0 10 47 79 5kp60a 60 66.7 73.7 5 96.8 10 52 70 5kp64 64 71.1 86.9 5 114.0 10 44 85 5kp64a 64 71.1 78.6 5 103.0 10 49 75 5kp70 70 77.8 95.1 5 125 10 40 93 5kp70a 70 77.8 86.0 5 113 10 44 84 5kp75 75 83.3 102.0 5 134 10 37 100 5kp75a 75 83.3 92.1 5 121 10 41 90 5kp78 78 86.7 106.0 5 139 10 36 104 5kp78a 78 86.7 95.8 5 126 10 40 94 5kp85 85 94.4 115.0 5 151 10 33 113 5kp85a 85 94.4 104.0 5 137 10 36 102 5kp90 90 100 122 5 160 10 31 120 5kp90a 90 100 111 5 146 10 34 109 5kp100 100 111 136 5 179 10 28 134 5kp100a 100 111 123 5 162 10 31 122 5kp110 110 122 149 5 196 10 26 147 5kp110a 110 122 135 5 177 10 28 132 note 1: transient voltage suppressors are normally selected with reverse ?stand-off voltage? v wm which should be equal or greater than the dc or continuous peak operating voltage level. note 2: for bidirectional construction, indicate c or ca suffix after the part number. note 3: for the 5kp5.0c and 5kp5.0ca double the maximum standby current to 4000 ua mechanical characteristics case: void-free transfer molded thermosetting epoxy body meeting ul94v-0 marking: body painted, alpha-numeric polarity: cathode band. bidirectional not marked for polarity sales@digitroncorp.com dimensions digi i inches millimeters min max min max bd 0.340 0.360 8.600 9.100 bl 0.340 0.360 8.600 9.100 ld 0.047 0.053 1.194 1.346 ll 1.000 - 25.400 - fax +1.908.245-0555 www.digitroncorp.com rev. 20120710
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 5kp5.0-5kp110a 5000w transient voltage suppressor case 5r dimensions are in inches sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20120710
|
